Home

RITSI Registered items: ITS-SRSA

Note 1: “Exp” stands for exponent.

Note 2: Units and exponent information is recommended, not required.

ID	Description	Assignee	Updated	State	Direction	Units	Exp	Imprecision	Test Activation
FAC	Field device: air conditioner on	ISO TC 204	2024-03-25	assigned	any	Boolean	0	0	Yes
FAH	Field device: ambient air relative humidity	ISO TC 204	2023-07-06	assigned	input	Percent	-1	<=100	No
FAL	Field device: ambient light	ISO TC 204	2023-07-06	assigned	input	Unitless	0	NA	No
FAT	Field device: ambient air temperature	ISO TC 204	2023-07-06	assigned	input	Celsius	-2	<=100	No
FBA	Field device: battery electric current	ISO TC 204	2023-07-06	assigned	input	Amperes	-2	<=100	No
FBC	Field device: battery charge	ISO TC 204	2023-07-06	assigned	input	Percent	-1	<=100	No
FBV	Field device: battery voltage	ISO TC 204	2023-07-06	assigned	input	Volts	-2	<=100	No
FCT	Field device: controller air temperature	ISO TC 204	2025-05-26	assigned	input	Celsius	-2	<=100	No
FDC	Field device: dehumidifier control	ISO TC 204	2023-07-06	assigned	output	Boolean	0	0	Yes
FDO	Field device: enclosure door open	ISO TC 204	2024-03-25	assigned	input	Boolean	0	0	No
FEH	Field device: enclosure relative humidity	ISO TC 204	2024-03-25	assigned	input	Percent	-1	<=100	No
FET	Field device: enclosure air temperature	ISO TC 204	2024-03-25	assigned	input	Celsius	-2	<=100	No
FFO	Field device: enclosure fan on	ISO TC 204	2024-03-25	assigned	any	Boolean	0	0	Yes
FGA	Field device: generator electrical current	ISO TC 204	2023-07-06	assigned	input	Amperes	-2	<=100	No
FGF	Field device: generator fuel level	ISO TC 204	2023-07-06	assigned	input	Percent	-1	<=100	No
FGS	Field device: generator engine speed	ISO TC 204	2023-07-06	assigned	input	RPM	0	<=100	No
FGV	Field device: generator voltage	ISO TC 204	2023-07-06	assigned	input	Volts	-2	<=100	No
FHO	Field device: enclosure heater on	ISO TC 204	2024-03-25	assigned	any	Boolean	0	0	Yes
FLA	Field device: mains power line current*	ISO TC 204	2023-07-06	assigned	input	Amperes	-2	<=100	No
FLV	Field device: mains power line voltage in volts root mean squared	ISO TC 204	2023-07-06	assigned	input	Vrms	-2	<100	No
FPA	Field device: power supply output current	ISO TC 204	2024-03-25	assigned	input	Amperes	-2	<=100	No
FPS	Field device: power supply*	ISO TC 204	2024-03-25	assigned	input	Enumerated	0	NA	No
FPT	Field device: processor card temperature	ISO TC 204	2023-07-06	assigned	input	Celsius	-2	<=100	No
FPV	Field device: power supply output voltage	ISO TC 204	2024-03-25	assigned	input	Volts	-2	<=100	No
FSA	Field device: solar power current	ISO TC 204	2023-07-06	assigned	input	Amperes	-2	<=100	No
FSV	Field device: solar power voltage	ISO TC 204	2023-07-06	assigned	input	Volts	-2	<=100	No
FTT	Field device: thermostat temperature	ISO TC 204	2024-03-25	assigned	bi-directional	Celsius	-2	<=100	No
FWA	Field device: wind power electrical current	ISO TC 204	2023-07-06	assigned	input	Amperes	-2	<=100	No
FWV	Field device: wind power voltage	ISO TC 204	2023-07-06	assigned	input	Volts	-2	<=100	No
FXB	Field device: auxiliary bi-directional	ISO TC 204	2024-03-25	assigned	bi-directional	any	any	any	No
FXI	Field device: auxiliary input	ISO TC 204	2024-03-25	assigned	input	any	any	any	No
FXO	Field device: auxiliary output	ISO TC 204	2024-03-25	assigned	output	any	any	any	No
MDS	Message sign: drum status*	ISO TC 204	2024-03-25	assigned	input	Enumerated	0	NA	No
MLS	Message sign: lamp status*	ISO TC 204	2024-03-25	assigned	input	Enumerated	0	NA	Yes
VSS	Vehicle: speed sensor	ISO TC 204	2024-03-25	assigned	input	m/s	-1	<=100	No

Mains Power Line Current negative values mean energy is being sent to the grid

Drum Status Enumerations

• other(1): an error not defined by the other enumerated values.
• noError(2): the drum is working properly.
• interlockError(3): the drum has failed to lock into a correct display position. It is hung up between two adjacent drum faces.
• stuckError(4): the drum cannot be moved from its present position, due to a problem with the drum mechanism.
• positionError(5): the drum has moved to a position other than the position requested by the DMS controller.
• positionUnknownError(6): the DMS controller cannot determine the position of the drum.

Lamp Status Enumerations

• other(1): an error not defined by the other enumerated values.
• noError(2): the lamp is working properly.
• stuckOff(3): the lamp is not able to turn on.
• stuckOn(4): the lamp is not able to turn off.

Power Supply Enumerations

• other(1): an error not defined by the other enumerated values.
• noError(2): the power supply is working properly.
• inputPowerError(3): the power supply is not receiving an acceptable power input.
• powerSupplyFailure(4): the power supply is indicating a failure (e.g., not responding as it should, receiving acceptable input but unable to provide acceptable output)

Home

---

Project maintained by ISO-TC204

Hosted on GitHub Pages — Theme by mattgraham